Stryi Profi Master 31-Piece Relief Carving Tool Set
Best price now
$1,999.00at Wood carving tools STRYIChecked Nov 7
Prices are checked against each store and labelled with when.
Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Stryi Profi Master is a 31-piece relief carving set aimed at carvers working large panels, architectural details and cabinetry. It covers straight gouges from sweep #1 to #9, five V-parting tools, bent and short-bent chisels, a reverse bent chisel for undercuts and a short bent gouge for hollowing. Blades are hand-forged W1-7 high-carbon steel at 60–62 HRC with a thin 2 mm profile, set in octagonal linseed-oiled oak handles. Against smaller starter sets it trades breadth for commitment: you get nearly every profile in one go, but no mallet, sharpening gear or storage beyond two canvas rolls.
In stockShips from abroad · duties may apply
Lowest price we've seen: $1,999.00 on Nov 5 at Wood carving tools STRYI. Tracked across 1 store since Nov 5.
Owners describe the set as top quality that feels good in the hands, and several say they would recommend it to a friend.
| Chisel Type | Blade Width (mm) | Handle Length (mm) | Total Length (mm) | Recommended Use |
|---|---|---|---|---|
| Straight Chisels | 5,10,8, 10,15, 20, 25,30 | 110 | 220 | Versatile use for medium |
| V-parting Chisels | 3, 5, 10,15 | |||
| Long Bent Gouges | 5,10, 15, 20, 25 | 130 | Ideal for deep cuts and | |
| Large Bent Gouges | 20, 30, 40 | 150 | 320 | Deep carving in large-sc |
| Sculpture Gouges | 25, 30, 40 | 290 | Heavy-duty sculpting wit | |
| Palm carving tools | 3, 5, 10, 15(for request | 80 | Precision carving, fine | |
| Short carving tools with | 2, 6, 10, 15,20,25,30 | 170 | Perfect for geometric ca |
This is a 31-piece relief carving set for architectural relief and cabinetry work. It includes straight gouges, V-parting tools, bent and short-bent chisels, and a reverse bent chisel for undercuts.
The blades are hand-forged from W1-7 high-carbon steel. They are 2 mm thick, which reduces the wedge effect for deeper cuts with less resistance. The steel is 60–62 HRC after an 11-stage tempering cycle. The octagonal European oak handles are finished with natural linseed oil. Each blade is 12 cm long and each tool is 25 cm overall, which gives leverage and visibility on large relief panels.
The tools are made for hand pressure and push cuts and are not compatible with a mallet. Narrower blades suit fine details and larger ones suit bulk removal. Sweep #1 is a flat edge and #9 is a semicircular edge, with #5, #7 and #8 in between. The tools arrive pre-sharpened with protected edges and come with two canvas roll-cases.
