
Sundown Audio 2000W RMS Dual 1-Ohm Voice Coil 10" Car Subwoofers
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Sundown Audio X-6.5SW is a 6.5-inch car subwoofer built for tight spaces where a full-size driver won't fit. It handles up to 400W RMS through a 2-inch four-layer CCAW voice coil on a Kapton former, and its 16mm one-way Xmax at 70 percent BL gives it more cone travel than most small drivers. It suits compact builds in small sealed or ported boxes, but it is mechanically limited and needs a properly designed enclosure to survive. Against larger 10- and 12-inch subs it trades output and low-end depth for a 4-inch mounting depth and a tiny footprint.
In stockSold by AudiosavingsReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
The Sundown Audio X-6.5SW is a 6.5" car subwoofer designed for compact bass systems where available enclosure space is limited. It handles up to 400 watts RMS and uses a 2" four layer CCAW voice coil on a thick Kapton former. The driver is intended for properly designed small enclosures and should be paired with a compatible amplifier, enclosure, and electrical system for safe operation. Excursion and Motor Design: The X-6.5SW features 16mm one way Xmax measured at 70 percent BL, supporting extended cone travel for low frequency reproduction. A large pole vent and spiral cut basket venting design help support airflow around the motor structure. The driver also uses a copper pole cap to help reduce inductive distortion and integrated tinsel leads to help reduce lead movement noise during operation. Enclosure Recommendations: This woofer is mechanically limited and is designed for a small enclosure. The recommended ported enclosure size is 0.3 cu ft with 4 sq in of port area tuned to 32 Hz. A ported range of 0.25 to 0.33 cu ft may also be used when properly designed. A sealed enclosure size of 0.15 cu ft is listed for compact installations. Larger or improperly designed enclosures can reduce mechanical power handling. Mounting and Fitment: The subwoofer has a 4.00" mounting depth, 6.75" outside diameter, and 5.52" cutout requirement. Driver displacement is approximately 0.05 cu ft, and motor diameter measures 5.51". These dimensions should be included when calculating final enclosure net volume and checking internal mounting clearance. Confirm that the enclosure mounting surface and baffle thickness provide secure support for the driver. System Characteristics: The X-6.5SW has a free air resonance of 55.778 Hz and sensitivity rated at 78.5 dB at 1 watt 1 meter. Its compact format is suited for custom vehicle installations that need a small subwoofer with controlled enclosure requirements. Confirm amplifier power, final speaker impedance, enclosure volume, port tuning, wiring method, and mounting depth before installation.








