Compared across 2 stores. Prices are checked against each store and labelled with when. Store links may earn us a commission. As an Amazon Associate, Deal.ai earns from qualifying purchases.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Sundown Audio E-12 V.4 D2 is a pair of 12-inch car subwoofers, each with dual 2-ohm voice coils and 750W RMS (1500W peak) power handling. Their standout spec is a 14mm one-way linear Xmax, unusually long travel for this class, plus a 2.5-inch four-layer copper voice coil and a double-stacked magnet. Sundown designed them for ported enclosures and does not recommend sealed boxes. They suit bass-focused builders running two matched drivers on a strong amplifier; rivals at this level often trade some excursion for higher sensitivity or easier sealed-box use.
In stockSold by AudiosavingsReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
Availability unknown
As an Amazon Associate, Deal.ai earns from qualifying purchases.
Store links may earn us a commission.
Lowest price we've seen: $244.99 on Nov 12 at Amazon. Tracked across 1 store since Nov 12.
Owners of the E series describe strong, clean low-frequency output in properly built ported boxes and note the drivers take rated power without complaint. Complaints center on the need for a large, well-tuned enclosure and on amplifier and electrical demands.
This set includes two matching Sundown Audio E-12 V.4 D2 12-inch car subwoofers. Each has dual 2 ohm voice coils, 750 watts RMS power handling and 1500 watts peak power handling. The pair is meant for custom car audio builds that use a ported enclosure and a compatible amplifier.
Each driver has a 2.5 inch high-temperature, 4-layer copper voice coil and a double stacked magnet. The BL rating is 17.274, sensitivity is 85.504 dB, and one-way linear Xmax is 14mm. The motor gap is heavily vented and has a solid pole piece to help with cooling.
The frame is stamped steel. A high-strength poly cotton spider is bolted and glued to the frame, and stitched-on Mini XL tinsel leads are used for the signal connection. Push terminals take the speaker wire. The E-12 V.4 D2 is optimized for ported enclosures, and sealed enclosures are not recommended.
