Black FridayDealsBuying guidesBrandsStoresTermsPrivacydeal.ai apps

© Deal.ai Inc.

Deal.ai › Inland
Inland
Inland PETG+ 1.75mm 3D Printer Filament Spool

Inland PETG+ 1.75mm 3D Printer Filament Spool

Best price now

$12.99at Micro CenterObserved at 1:25 PM

Prices are checked against each store and labelled with when.

Visit Micro Center

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Enter to send, Shift+Enter for a new line

Our take on the Inland PETG+ 1.75mm 3D Printer Filament Spool

Inland PETG+ is a 1.75mm 3D printer filament sold in 1kg spools. It is a glycol-modified PETG blend designed for toughness and impact resistance, making it suitable for functional parts. As of November 4, 2026, the best new price is $12.99 at Micro Center, the only store listing it new. That price is low for a 1kg spool of PETG+.

Best forMakers printing impact-resistant partsFunctional prototypes and bracketsUsers wanting a low-cost PETG option
Pros
  • Tough and impact-resistant
  • Low price at $12.99 per kg
  • Prints with good layer adhesion
  • Moderate chemical resistance
Cons
  • Requires higher nozzle temperatures
  • Can string without tuning
  • Limited store availability

Inland PETG+ 1.75mm 3D Printer Filament Spool prices at every store

  • Micro CenterNew

    In stock

    $12.99Observed at 1:25 PM
    Visit store

Also available at

  • eBayCheck price at eBay

Inland PETG+ 1.75mm 3D Printer Filament Spool price history

Lowest price we've seen: $12.99 on Nov 4 at Micro Center. Tracked across 1 store since Nov 4.

Specifications

Type
Filament
Filament Diameter
1.75mm
Filament Type
PETG+ (Polyethylene Terephthalate Glycol)
Weight
1kg (2.2 lbs)

Questions and answers

Is Inland PETG+ worth it?
At $12.99 for 1kg, it is a low-cost PETG+ option. It suits functional parts that need impact resistance, but you may need to tune retraction to reduce stringing.
What nozzle temperature should I use?
Most PETG filaments print around 230–250°C. Start at 240°C and adjust based on your printer and test prints.
Does it need a heated bed?
Yes, a heated bed helps adhesion. Set it to 70–80°C and use a glue stick or PEI sheet if needed.
Is it compatible with all 3D printers?
It works with any printer that supports 1.75mm filament and reaches the required temperatures. Direct-drive extruders handle it better than some Bowden setups.
When is it cheapest?
The best new price found is $12.99 at Micro Center as of November 4, 2026. Prices may vary, so check current listings.
Where is the Inland PETG+ 1.75mm 3D Printer Filament Spool cheapest?
At Micro Center, for $12.99, as of our latest check.
Where can I buy the Inland PETG+ 1.75mm 3D Printer Filament Spool?
2 stores we checked sell it, including Micro Center, eBay.

Shoppers also compared

  • E
    eSUN PETG
    eSUN PETG
  • O
    Overture PETG
    Overture PETG
  • P
    Prusament PETG 1.75mm
    Prusament PETG 1.75mm
  • E
    eSUN PETG Filament 1.75mm
    eSUN PETG Filament 1.75mm
  • P
    Polymaker PolyLite PETG 1.75mm
    Polymaker PolyLite PETG 1.75mm
  • P
    Prusament PETG
    Prusament PETG
  • R
    Rapid PETG
    Rapid PETG
  • S
    SUNLU PETG 3D Printing Filament
    SUNLU PETG 3D Printing Filament

Compare the Inland PETG+ 1.75mm 3D Printer Filament Spool

  • Inland PETG+ 1.75mm 3D Printer Filament Spool vs eSUN PETG
  • Inland PETG+ 1.75mm 3D Printer Filament Spool vs Overture PETG

More from Inland

  • I
    Inland 12-Outlet Power Strip 3201
    Inland 12-Outlet Power Strip 3201
  • I
    Inland PETG-ESD 3D Printer Filament 1.75mm 1kg
    Inland PETG-ESD 3D Printer Filament 1.75mm 1kg
  • I
    Inland PETG-CF 3D Printer Filament 1.75mm 1kg
    Inland PETG-CF 3D Printer Filament 1.75mm 1kg
All Inland deals and products →