Will it fit under or behind a pickup truck seat?

Its shallow depth is designed for standard and extended-cab trucks, and the removable feet let it sit flat or upright. Measure your mounting depth before buying.

What amplifier does it need?

It is a 2-ohm single voice coil rated at 300 W RMS, so pair it with a mono amp stable at 2 ohms and rated near that figure.

Can it be mounted facing down?

Yes. The feet and cushions come off so it can fire downward, sit upright, or lie flat facing up.

Is a grille included?

Yes, a rigid steel mesh grille is in the box to protect the cone.

How does it compare with a separate sub and box?

It saves the work of matching a driver to an enclosure, but you cannot change box volume or tuning later. A custom ported box can play louder and deeper.

Does it come with an amplifier or wiring?

No. The box contains the loaded subwoofer and grille; you supply the amplifier and wiring.

Where can I buy the TS-A2500LB 10" Shallow-Mount Loaded Subwoofer Enclosure?

15 stores we checked sell it, including Amazon, Walmart, Best Buy, Crutchfield, eBay.

TS-A2500LB 10" Shallow-Mount Loaded Price History: Lowest $239.94

Q: Where is the TS-A2500LB 10" Shallow-Mount Loaded Subwoofer Enclosure cheapest?

At Amazon, for $239.94, as of our latest check.

Q: What do buyers say about the TS-A2500LB 10" Shallow-Mount Loaded Subwoofer Enclosure?

Rated 4 out of 5 from 100 ratings.

What reviewers say

4 / 5100 ratings

Owners rate it around 4 out of 5 and mostly praise the fit in tight spaces and the easy install. Complaints center on output that is polite rather than heavy and on the fixed enclosure limiting upgrades.

What people mention

SizePraisedOwners say the shallow box fits in tight truck and hatchback spaces.
OutputMixedReviewers find the bass adequate but not as strong as a full-size box.
InstallPraisedBuyers like that it arrives pre-loaded and wires up quickly.
Power handlingCriticisedSome owners say the 300 W RMS rating caps how hard it can hit.
ImpedanceMixedThe 2-ohm coil gets more power from some amps but needs a stable amplifier.

From Pioneer Electronics

1200W max power, 300W nominal (RMS)
10" glass-fiber and mica reinforced IMPP cone
Rubber surround and Aramid-fiber dual-spider design
Frequency range 20 Hz to 1.0 kHz
2-ohm single voice coil, 88 dB sensitivity (1W/1M)
Compact shallow enclosure can be mounted upright, flat facing up, or down-firing

Materials: Glass-fiber and mica reinforced injection-molded polypropylene (IMPP) cone; rubber surround; Aramid-fiber dual spider; fully carpeted enclosure with embroidered
Fit: Shallow enough for a wide variety of vehicles, including pickup trucks with standard or extended-cab models; feet and cushions are removable for different layou
Sizing: Box dimensions (WxHxD): 20.875" (530mm) x 11.750" (300mm) x 5.875" (150mm). Check all dimensions including depth to ensure fitment; fitment guide is not guarant
Shipping: Free UPS Ground shipping on orders over a set amount (before tax) within the 48 contiguous United States and Washington, DC; excludes Hawaii and Alaska. UPS 2nd
In the box: Rigid mesh grille, Removable feet

About the TS-A2500LB 10" Shallow-Mount Loaded Subwoofer Enclosure

The TS-A2500LB features a compact, space-saving enclosure designed for optimal use of space. The enclosure is shallow enough for mounting in a wide variety of vehicles, including pickup trucks with standard or extended-cab models. Its unique design allows it to be mounted upright, lying flat facing upwards, or configured in a down-firing position. The enclosure is fully carpeted with an embroidered Pioneer logo, creating a non-slip and scratch-resistant surface. This Shallow-Mount Pre-Loaded Enclosure provides a maximum power of 1200 W with continuous 300 W RMS. The subwoofer features a glass fiber and mica interlaced, injection-molded polypropylene IMPP™ cone with a 2 Ω single voice coil. The subwoofer is also fully protected by a steel mesh grille. For installation flexibility, the feet and cushions are removable to enable different layout configurations to suit your vehicle’s application.