It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a two-part, 3:1 epoxy casting resin built for clear, deep pours. It mixes to a low-viscosity liquid that self-levels, releases bubbles on its own, and cures with very little shrinkage, so embedded objects and clear cast pieces stay sharp. The maker rates it non-yellowing and UV resistant, which matters for pieces that sit in daylight. With a 70–80 minute pot time and a 12–24 hour cure, it sits in the same class as other slow-cure casting epoxies; curing at 40°C speeds throughput for small production runs. It suits hobby casters, jewelry and paperweight makers, and woodturners who want a glossy clear coat.
In stockShips from India · priced in INR (₹400.00) · duties may applyReturn policy
Ratings are high at 4.8 out of 5, but only 10 buyers have rated it, so the picture is thin.
This is a two-component epoxy casting resin for clear casting, made of a modified low-viscosity resin and a hardener. It cures with negligible shrinkage and keeps the optical clarity of the pour. The cured resin has a high-gloss, durable finish and is non-yellowing.
The resin is self-leveling and odorless, and releases trapped air on its own. Pot time is 70 to 80 minutes, with a cure time of 12 to 24 hours. Curing at 40 °C speeds up production. It is safe for home use.
To use it, measure 3 parts resin to 1 part hardener by weight and stir well for 2 to 3 minutes. Let the mix sit for a couple of minutes, then pour it clear or add pigment.