This is a pack of two Vatrer 48V (51.2V) 100Ah server rack lithium batteries. Each uses EV-grade LiFePO4 cells and stores 5120Wh (5.12kWh). The cells support over 5000 charge cycles at 100% depth of discharge. A built-in 100A smart BMS monitors voltage, current and temperature in real time. It protects against overcharge, overdischarge, overcurrent, short circuit and extreme temperatures, and it balances the cells.
A self-heating function allows charging in cold weather. When the battery temperature drops to 32°F, the internal heating system activates during charging. Once the temperature reaches 41°F, heating stops and normal charging continues.
A touchscreen, WiFi module and Bluetooth let you monitor the battery locally or remotely. You can view state of charge, voltage, current, temperature and battery status on the screen or in the Vatrer app. WiFi also enables remote monitoring, system configuration changes, OTA firmware upgrades and multi-battery management.
- Pack size
- 2 batteries
- Nominal voltage
- 48V (51.2V)
- Capacity
- 100Ah, 5120Wh (5.12kWh) per battery
- Cell type
- EV-grade LiFePO4
- Cycle life
- Over 5000 cycles at 100% depth of discharge
- BMS
- Built-in 100A smart BMS
- Cold-weather heating
- Heating starts at 32°F during charging and stops at 41°F
- Monitoring
- Touchscreen, WiFi, Bluetooth, Vatrer app
- Installation
- Server rack mount; horizontal or vertical
- Expansion
- Up to 10 units in parallel, up to 51.2kWh
- Charger charging
- 58.4V 20A LiFePO4 charger, full charge in about 5 hours
- Solar charging
- Via 48V MPPT charge controller; about 1500W of solar input on a sunny day
- DC-DC charging
- 30A DC-DC charger from a generator or vehicle system