What compressor does this sandblaster need?

It runs at 60-110 PSI and consumes 6-25 CFM depending on the nozzle. A compressor that cannot sustain that flow will stall and blast weakly.

What abrasives can I use?

Dry 60-100 grit media such as silica sand, aloxite or glass beads. The tank takes about 4.9 gallons of abrasive, less than its 10-gallon volume.

Does it come with nozzles and a gun?

Yes. The box includes four ceramic nozzles (2.0, 2.5, 3.0 and 3.5 mm), a hose with handheld gun, a pressure gauge, a water-oil separator, seal tape and a face mask.

Can I use it indoors?

Blasting throws dust and abrasive widely, so it is best used outdoors or in a ventilated area. The wheels make it easy to move outside.

Is it better than a siphon sandblaster?

A pressure tank like this delivers more abrasive per burst and strips faster than a siphon gun. The trade-off is that it needs a larger compressor and more space.

Where can I buy the VEVOR 10 Gallon Portable Air Sandblaster Rubber?

2 stores we checked sell it, including Newegg, Lowe's.

VEVOR 10 Gallon Portable Air Sandblaster Price History: Lowest $132.90

Q: Where is the VEVOR 10 Gallon Portable Air Sandblaster Rubber cheapest?

At Newegg, for $132.90, as of our latest check.

From Newegg

10 gallon / 40 L tank for large-area surface treatment
High sandblasting density for quick removal of rust and stain on iron frames, statues, car paint or marble engravings
Water oil separator with pressure gauge removes moisture from compressed air to prevent clogging
Two 6-inch rubber wheels make it easy to move for outdoor rust removal work
Working pressure 60-110 PSI; air consumption 6-25 CFM
Recommended abrasive capacity 4.9 gallons, for 60-100 grit abrasives like silica sand, aloxite and glass beads

Guarantee: Contact the Seller directly for warranty information; it may also be found on the Manufacturer's website.
Returns: Return for refund within 30 days; return for replacement within 60 days; covered by VEVOR Official Shop US Return Policy.
Shipping: Shipped by VEVOR Official Shop US.
In the box: 4 x Ceramic Nozzles (2.0 mm, 2.5 mm, 3.0 mm, 3.5 mm), 1 x Sandblasting Face Mask, 1 x Seal Tape, 1 x Pressure Gauge, 1 x Hose with Handheld Sandblasting Gun, 1 x Large R-type Pin

About the VEVOR 10 Gallon Portable Air Sandblaster Rubber

This portable air sandblaster has a 10 gallon (40 L) tank for treating large surfaces. It removes rust and stains from iron frames, statues, car paint and marble engravings.

A water oil separator with a pressure gauge removes moisture from the compressed air to prevent clogging. Two 6-inch rubber wheels make it easy to move for outdoor rust removal work.

It works at 60-110 PSI and uses 6-25 CFM of air. It is intended for 60-100 grit abrasives such as silica sand, aloxite and glass beads.

Tank capacity: 10 gallon / 40 L
Working pressure: 60-110 PSI
Air consumption: 6-25 CFM
Abrasive capacity: 4.9 gallons recommended
Abrasives: 60-100 grit: silica sand, aloxite, glass beads
Wheels: 2 x 6-inch rubber
Moisture control: Water oil separator with pressure gauge
Color: Orange
In the box: 4 x ceramic nozzles (2.0 mm, 2.5 mm, 3.0 mm, 3.5 mm), 1 x sandblasting face mask, 1 x seal tape, 1 x pressure gauge, 1 x hose with handheld sandblasting gun, 1 x large R-type pin