The WEN 8-Inch Helical Benchtop Jointer is a corded benchtop machine for flattening and squaring boards up to 8 inches wide. Its 16-blade helical cutterhead and 10-amp motor spinning at up to 12,000 rpm are the headline: helical heads give a cleaner finish on figured and hard woods than straight-knife jointers, and individual carbide inserts can be rotated instead of resharpened. The aluminum table runs 33 by 8 inches and extends to 51 inches with support arms, and the fence bevels to 45 degrees. It suits hobbyists and small shops that want helical-head results without a floor-standing machine; the trade-offs are a light 55-pound build, a shallow 1/8-inch maximum depth of cut and a bed that is short for long stock without the extensions.
In stock
In stock
In stockSold by Tekcom Shop USA
Availability unknown
Also available at
Lowest price we've seen: $463.79 on Nov 20 at Home Depot. Tracked across 4 stores since Nov 20.
Owners of the WEN 8-inch helical jointer generally report clean, tearout-free finishes and good value for a helical-head machine. Common complaints center on the light aluminum build, the shallow depth of cut and setup that needs checking out of the box.
The WEN 8-Inch Helical Benchtop Jointer is a corded electric jointer that flattens boards and workpieces. Its helical cutterhead holds 16 staggered HSS blades, and the 10-amp motor turns the cutterhead at up to 12,000 times per minute.
The infeed table adjusts to remove 0 to 1/8 inch of material per pass, with an onboard depth-of-cut scale. The adjustable fence bevels up to 45 degrees for angled cuts along the faces of boards, and the jointer accepts workpieces up to 20 inches thick.
An onboard dust port helps keep cleanup minimal. Two push blocks are included for safer jointing, and the jointer weighs 55.1 lb.
It checks today's price at every store, compares the alternatives and answers in about a minute.