Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The WEN 6524 is a benchtop oscillating belt and spindle sander built around a 3.5-amp motor. It runs a 4 x 24 inch belt at up to 1575 FPM and swaps to five spindle drums from 1/2 to 2 inches, oscillating both 58 times per minute with a 5/8-inch stroke. That combination of belt and spindle in one machine is the main draw: most rivals at this level are either a belt sander or a spindle sander, not both. It suits home woodworkers and small shops shaping curves, edges and inside cuts, and onboard storage keeps the drums and sleeves together. The bundled POWERTEC 71002V rubber cleaning stick is a simple accessory for clearing pitch and dust from belts and discs.
In stockReturn policy
Owners of the WEN 6524 generally treat it as good value for a combined belt and spindle sander, praising the oscillation and the range of drum sizes. Common complaints center on setup time when switching between belt and spindle and on dust that escapes without a vacuum attached.
This bundle pairs the WEN 6524 oscillating belt and spindle sander with a POWERTEC 71002V abrasive cleaning stick. The sander comes with five sanding drum sizes and one 4 x 24 inch belt. Onboard storage keeps the accessories and sandpapers organized.
The sander's 3.5-amp motor oscillates the belt and spindle 58 times per minute with a 5/8-inch stroke. Belt speeds reach up to 1575 FPM, and spindle speeds reach up to 2000 RPM.
The cleaning stick is made of all-natural rubber. It removes sawdust, pitch, gum, glue and other residue from sanding discs, belts and other sander equipment without damaging the grit. To use it, hold the stick against the abrasive while the sander is running.
