This is a dual battery isolation controller with a built-in relay for 12V systems. It manages a main battery and an auxiliary battery automatically using a power management chip and electronic circuitry. It is made for vehicles and boats, including ATVs, UTVs, trucks, caravans, RVs and boats.
The controller connects the two batteries while the main battery is charging. When the main battery voltage is greater than 13.3V, it charges the auxiliary battery. When the main battery voltage drops below 12.7V, the main and auxiliary batteries are disconnected, with a breakaway delay of 5 to 10 seconds. Surge protection is built in, and an 80A fuse is recommended.
The housing is made of ABS and metal, is waterproof and is built for heat dissipation. The power studs are M6 copper screw nuts. The unit measures 68 x 52 x 68mm and works in ambient temperatures from -20 to 50 degrees Celsius.
- Material
- ABS and metal
- Voltage
- 12V
- Continuous current
- 100-120A
- Instantaneous current
- 160A
- Current draw, charging
- 250mA
- Current draw, standby
- 8mA
- Charge threshold
- Main battery above 13.3V
- Disconnect threshold
- Main battery below 12.7V
- Breakaway delay
- 5-10 seconds
- Recommended fuse
- 80A
- Power stud
- M6 copper screw nut
- Surge protection
- Built-in
- Ambient temperature
- -20 to 50 degrees Celsius
- Dimensions
- 68 x 52 x 68mm
- Weight
- 0.26kgs / 0.56lb
- Package size
- 10cm x 8cm x 8cm