
Bambu Lab P2S Combo Starter Kit
Best price now
Prices are checked against each store and labelled with when.
Finding cheaper alternatives
Price facts
- Last seen at $759.00 at INNOADDI on Nov 17.

Prices are checked against each store and labelled with when.
The P2S Combo is Bambu Lab's enclosed CoreXY 3D printer paired with the AMS 2 Pro multi-filament system and a filament dryer in one package. It adds a 5-inch touchscreen with a second-generation UI, a servo extruder rated at up to 8.5 kg of extrusion force, real-time clog and grinding detection, and an adaptive airflow system that pulls cool outside air instead of recirculating chamber heat. A heated chamber up to 50°C makes it a fit for engineering-grade filaments, and the AMS 2 Pro handles multi-color work and drying. Against its predecessor it is a refinement rather than a reinvention: faster, more reliable extrusion and a better screen, with the same enclosed, multi-material formula that made the line popular.
In stockReturn policy
Owners of the P2S Combo generally praise the multi-color output and the drying AMS, and report fewer failed high-flow prints thanks to the stronger extruder and clog detection. Complaints center on purge waste, the learning curve of the AMS, and the space the enclosed machine demands.
The Bambu Lab P2S Combo Starter Kit bundles the P2S 3D printer with the AMS 2 Pro, a multi-filament system that handles multi-color printing and filament drying in the same unit. The chamber holds 50°C for engineering-grade filaments. A filament buffer, buildplate, spool holder and accessory box are included.
The printer runs on a 5-inch touch screen with a second-generation interface and a faster processor, showing step-by-step instructions. Its PMSM servo extruder delivers up to 8.5 kg of maximum extrusion force, 70% more than its predecessor, and samples resistance and position at 20 kHz to detect filament grinding and clogs in real time. The Adaptive Airflow System draws cool air from outside the chamber instead of recirculating hot air, and its flaps seal heat inside when a 50°C chamber is needed. Internal air passes through a high-performance carbon filter.
AI computer vision watches for common printing problems such as spaghetti and nozzle blobbing, and checks print start settings. The hotend swaps in about 30 seconds with a one-clip mechanism that releases the nozzle and heatsink assembly without disconnecting wiring. The AMS 2 Pro uses an active venting system that dries filament 30% faster than sealed heating and keeps humidity low for storage, while its PMSM feeding motor speeds filament feeding by 60%.
It checks today's price at every store, compares the alternatives and answers in about a minute.






