The Engineering Plate is a build plate for Bambu Lab X1, X2, P1, P2 and A1 series printers. With a layer of glue applied, it works with all filaments.
Its coating resists heat, scratches and corrosion. It is made to withstand long, high-temperature prints and hundreds of cleanings and part removals. The smooth base coating gives the underside of a printed part a smooth, flat texture.
Apply glue to the plate before printing with any filament. Glue stick makes parts easier to remove, but it is thicker and harder to apply evenly, so first-layer quality and print stability are usually lower than with liquid glue. Liquid glue can make parts harder to remove. Choose the glue based on the filament and printing conditions.
- Compatibility
- Bambu Lab X1, X2, P1, P2 and A1 series
- Materials
- Polyester powder coating on manganese steel
- Steel thickness
- 0.5 mm flexible stainless steel
- Print area
- 256 x 256 mm
- Max temperature
- 120°C
- PLA / PLA-CF / PLA-GF
- 45-60 °C, no glue required
- PETG / PETG-CF
- 60-80 °C, glue stick or liquid glue
- TPU
- 35-45 °C, glue stick or liquid glue
- PVA
- 45-60 °C, glue stick or liquid glue
- ABS
- 90-100 °C, glue stick or liquid glue
- ASA
- 90-100 °C, glue stick or liquid glue
- PC / PC-CF
- 90-110 °C, glue stick
- PA / PA-CF / PAHT-CF
- 90-110 °C, glue stick
- PET-CF
- 80-100 °C, glue stick or liquid glue
- Package weight
- 500 g
- Package size
- 315 x 295 x 15 mm