It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a complete pre-greased hub and drum assembly for 6,000 lb trailer axles with a #42 spindle. It fits a 6 on 5-1/2" bolt pattern with 1/2"-20 studs and a 12" x 2" brake drum, and ships with bearings, races, a 2.250" seal, cone nuts, grease caps and spindle hardware. The pre-greased setup saves the bearing packing step that bare hubs require. It suits owners replacing a worn or damaged hub on a Dexter 6K axle, though buyers must confirm spindle, brake size and bolt pattern before ordering.
In stock
In stock
In stockSold by brechbilltrailers
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Also available at
Store links may earn us a commission.
Lowest price we've seen: $144.70 on Nov 11 at Explosive Powersports. Tracked across 10 stores since Nov 11.
Owners of Dexter 6K axles generally report this assembly drops in cleanly when the spindle and brake size match, and the pre-greased bearings save time. Complaints center on fitment confusion and the need to verify seal and bolt pattern before ordering.
The Dexter K08-201-2G is a pre-greased hub and drum assembly for 6,000 lb trailer axles that use a #42 spindle. It can be used to replace or service an existing hub and drum. The hub is Dexter part number 008-201-09, and the bearings come pre-greased as part of the kit, which reduces the bearing preparation needed during replacement.
The wheel pattern is 6 on 5.5" with 1/2"-20 wheel studs, and the brake drum is 12" x 2". The inner bearing is a 25580 and the outer bearing is a 15123. They are matched with a 25520 inner race and a 15245 outer race, and the races are pressed into the hub and drum. The 2.250" grease seal (010-036-00) has a 3.376" outside diameter and helps retain lubricant and keep contamination out of the bearing area.
The kit includes six 1/2"-20 60-degree cone nuts, standard and E-Z Lube® grease caps, a rubber plug, and spindle retention hardware.
