The Empire Rushmore Clean Face 35" Direct Vent Gas Fireplace Insert converts an existing wood-burning fireplace into a gas heating system. It works with masonry or factory-built fireplaces and is available for natural gas or propane. It produces up to 39,000 BTUs of supplemental heat.
Empire's TruFlame system creates large, natural-looking flames and a glowing ember bed that resembles a wood fire. The clean-face design has a ceramic glass front for an unobstructed view of the fire. The insert vents through a 3" x 4" direct vent flex system.
A multifunction remote controls variable flame height, the overhead accent light and the variable-speed blower. It works as a conventional thermostat, as a manual control, or in Smart Thermostat mode, which lowers the flame height as the room reaches the set temperature.
- Model
- DVCT35
- Installation
- Insert
- Vent type
- Direct vent
- Venting
- 3" x 4" flex
- Gas type
- Natural gas or propane
- Max BTU
- 39,000 natural gas; 35,000 propane (both burners)
- Min BTU
- 25,500 natural gas; 28,500 propane (both burners)
- Min BTU, front burner
- 10,000 natural gas; 11,000 propane
- kWh (maximum)
- 11.4 natural gas; 10.2 propane
- kWh (minimum)
- 2.9 natural gas; 3.2 propane
- Gas inlet valve
- 3/8" MIF shutoff valve (pipe)
- Width
- 35"