- Is eSUN PETG worth it over PLA?
- Yes for parts that must survive drops, heat or moisture. PLA is easier and faster to print but more brittle. PETG sits between PLA and ABS on strength and difficulty.
- What nozzle and bed temperatures should I use?
- Start around 240C at the nozzle and 70-80C on the bed. Drop to 230C if you see stringing, and use a release agent on glass.
- Does it need drying before printing?
- Often yes. PETG picks up moisture, which causes popping and weak layers. Dry the spool at about 65C for 4-6 hours if prints look cloudy or bubbly.
- How much filament is on the spool?
- 1 kg, roughly 350-355 m at 1.75 mm. That covers most medium-sized functional prints several times over.
- Is it compatible with a stock Bowden printer?
- Yes. It prints on most FDM machines with a heated bed, though an all-metal hotend handles the higher temperatures better.
- When is the price lowest?
- The best new price was $13.28 at eBay as of November 4, 2026. Spool prices move with sales, so compare across the four stores listing it before buying.
- Where is the eSUN PETG Filament 1.75mm cheapest?
- At eBay, for $13.28, as of our latest check.
- What do buyers say about the eSUN PETG Filament 1.75mm?
- Rated 4.8 out of 5 from 61 ratings. Buyers like: Rated 4.8 out of 5 from 61 reviews; 4363 sold.
- Where can I buy the eSUN PETG Filament 1.75mm?
- 4 stores we checked sell it, including eBay, eSUN Official Store, Quarktwin, Amazon.
