
Flipsky Anti Spark Switch Aluminum PCB/CASE V1.0 200A
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Flipsky Anti Spark Switch V1.0 is a high-power, 200A-rated electronic switch designed to prevent spark damage in high-voltage battery systems. It uses ten large-package MOSFETs on an aluminum PCB for better heat dissipation and can handle up to 20S (90V) input. The lock-button control with LED indication is simple and secure. It suits DIY builders of electric skateboards, e-bikes, and other high-current DC applications who need reliable power switching without sparks. Compared to basic anti-spark switches, its aluminum base plate and large MOSFETs offer superior thermal performance, though it requires a separate heat sink for sustained high currents.
In stockShips from China · duties may applyReturn policy
The Flipsky Anti Spark Switch is an aluminum PCB/case switch with V1.0 hardware, made to protect power contacts from electric-spark burning and oxidation and to protect integrated circuit components from breakdown and damage. Press the lock button to turn it on; the LED lights at the same time. Press the button again to release it and turn the switch off, and the LED turns off.
The aluminum base plate is built for heat dissipation, and the 10 x 10 large-package MOSFETs are intended for overcurrent and heat performance. The heat sink connects with thermally conductive silicone grease for heat conduction. There is no screw locking the heat sink and PCBA; a heat-transfer silicone pad holds them. Do not peel off the heat shrink. A larger heat sink can be added for continuous high-current output.
The switch has no short circuit protection and no reverse polarity protection; do not short the output or plug it in backwards. Keep output capacitance under 6,000 uF. Do not hot-swap: turn everything off before connecting or removing, unplug the battery first, wait for ESCs to turn off, then unplug the ESCs, and reverse the order when plugging in. Do not reprogram the MCU unless advised.
It checks today's price at every store, compares the alternatives and answers in about a minute.