
Flipsky Waterproof Brushless DC 6374 Motor 140KV 3600W
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Flipsky 6374 is an outrunner brushless DC motor built for electric skateboards, e-bikes and small drive projects. It runs on 6S to 16S packs, is rated 2400W continuous and 3600W peak, and carries an IP58 waterproof rating, which is unusual for a motor this size. The 140KV winding favors torque and lower top speed over raw RPM, so it suits heavier riders and hill-heavy routes. Against typical 6374 motors it trades some peak RPM for sealed, all-weather durability.
In stockShips from China · duties may applyReturn policy
Owners of Flipsky 6374 motors generally report solid torque and good sealing for the size, with the waterproof rating holding up in wet rides. Complaints center on heat under sustained load and cogging at low speed.
The Flipsky 6374 is a brushless DC motor rated at 140KV, with a maximum power of 3600W and a rated power of 2400W. It is built for a voltage range of 6–16S (25.2V–67.2V).
The motor draws a maximum current of 75A and a rated current of 50A. It has 12 slots and 14 poles, a resistance of 44.9 mΩ and an inductance of 28.6 µH, with insulation rated at AC500V/50Hz/1mA/3S.
It connects through three 12AWG (4.5mm) phase leads ending in 4mm male bullet plugs. The shaft is Φ10, the housing is waterproof to IP58, and the motor weighs 1.12kg.
It checks today's price at every store, compares the alternatives and answers in about a minute.