
LDO-36STH20-1004AHG(XH)(DFH)
Best price now
Prices are checked against each store and labelled with when.
Finding cheaper alternatives
Price facts
- Lowest price today: $15.99 at dfh.fm (checked Nov 17, 2026).

Prices are checked against each store and labelled with when.
The LDO-36STH20-1004AHG(XH) is a NEMA 14 pancake stepper with a 20 mm body, a 1.8° step angle and a 1.0 A/phase rating, built for compact direct-drive extruders. Its integrated module 0.5, 10-tooth gear and 2.5 mm shaft let it drop into Clockwork 2, Stealthburner, Galileo, Orbiter-style, LGX Lite and Sherpa Mini builds that call for this motor family. Class H insulation rated to 180°C sets it apart from generic pancakes, which often use lower-temperature windings and bearings. It suits Voron-style toolheads where stack height and weight matter more than raw torque.
In stockReturn policy
The LDO-36STH20-1004AHG(XH) is a NEMA 14 pancake stepper motor from LDO Motors with a 1.8° ± 5% step angle, made for compact direct-drive extruders on 3D-printer toolheads. The body is 20 mm long and the motor weighs about 85 g, which keeps stack height and weight down on a toolhead.
It is built for heat. The windings, bearings, magnetic steel and plastic skeleton are selected for Class H insulation, up to 180°C.
A module 0.5, 10-tooth gear with a 20° pressure angle is integrated on the 2.5 mm shaft. The motor has four leads and is rated 1.0 A/phase at 2.1 V/phase, with 100 mN·m holding torque. It is intended for Voron-style direct-drive builds whose BOM calls for this motor family, such as Clockwork 2 / Stealthburner, Galileo, Orbiter-style, LGX Lite and Sherpa Mini; check your extruder BOM, gear requirement, connector and pinout before installation. It is a stepper motor, not a complete extruder, drive-gear kit or stepper driver.
It checks today's price at every store, compares the alternatives and answers in about a minute.




