Overture Pink PETG 3D Printer Filament 1.75mm 1kg Spool
4.8Best price now
Prices are checked against each store and labelled with when.
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Our take on the Overture Pink PETG 3D Printer Filament 1.75mm 1kg Spool
Overture PETG is a 1 kg spool of 1.75 mm filament in pink, a glycol-modified PET that prints tougher and less brittle than standard PLA. It is rated for functional parts and outdoor use thanks to low shrinkage and water resistance. The best new price is $18.69 at Overture 3D as of November 4, 2026, and it is the only new listing, so there is no cheaper store to compare against.
- Higher impact strength than PLA
- Low shrinkage for fewer warped parts
- Water-resistant for outdoor use
- Wide 1.75 mm compatibility
- 1 kg spool covers a lot of prints
- Slow 30–50 mm/s print speed
- Prone to stringing without tuning
- Needs a heated bed and good first-layer settings
- Pink is the only color in this listing
Overture Pink PETG 3D Printer Filament 1.75mm 1kg Spool prices at every store
- Overture 3DNew
In stock
$18.69Observed at 1:25 PM
Also available at
Overture Pink PETG 3D Printer Filament 1.75mm 1kg Spool price history
Lowest price we've seen: $14.99 on Nov 4 at Overture 3D. Tracked across 1 store since Nov 4.
What reviewers say
With 4.8 out of 5 from 294 ratings, owners rate this filament highly, mainly for consistent diameter and strong, clean prints. Complaints center on stringing and the slower speeds PETG demands.
- Consistent diameter and smooth feeding
- Strong, durable finished parts
- Good layer adhesion
- Reliable spool winding
- Strings and oozes without retraction tuning
- Needs slower printing than PLA
- Occasional moisture pickup if left out
Specifications
- Size
- 1.75mm
- Weight
- 1 kg
- Type
- Filament
- Printing Material Type
- Polyethylene
- Filament Diameter
- 1.75 mm
- Filament Type
- PETG
- Printing Speed
- 30 - 50 mm/s (printing speed)
- Included Accessories
- Spool of filament
Questions and answers
- Is PETG worth it over PLA?
- Yes if the part needs to survive impact, heat or moisture. PLA is easier to print and stiffer, but PETG bends instead of cracking and holds up outdoors.
- What print settings does this filament need?
- Overture lists 30–50 mm/s. In practice use a heated bed around 70–80°C, a nozzle near 230–250°C and slower outer walls to limit stringing.
- Does it fit a standard printer?
- Yes. It is 1.75 mm filament on a 1 kg spool, which fits the common 1.75 mm printers and most spool holders.
- What is in the box?
- One 1 kg spool of 1.75 mm pink PETG filament. No accessories are included.
- Is $18.69 a good price?
- It is the only new price listed, $18.69 at Overture 3D as of November 4, 2026, so there is no competing store to beat it. That is a typical price for a 1 kg PETG spool.
- Can it be used outdoors?
- Yes. PETG resists water and has low shrinkage, so it suits outdoor brackets and garden parts, though long UV exposure will eventually dull the color.
- Where is the Overture Pink PETG 3D Printer Filament 1.75mm 1kg Spool cheapest?
- At Overture 3D, for $18.69, as of our latest check.
- What do buyers say about the Overture Pink PETG 3D Printer Filament 1.75mm 1kg Spool?
- Rated 4.8 out of 5 from 294 ratings.
- Where can I buy the Overture Pink PETG 3D Printer Filament 1.75mm 1kg Spool?
- 2 stores we checked sell it, including Overture 3D, eBay.
More from Overture
- OVERTURE Silk Filament PLA 1.75mm Clog-Free Shiny 3D Printer Filament
- Overture PETG Filament 1.75mm
- Overture High Speed PETG 3D Printer Filament 1.75mm
- Overture PETG
- Overture 1.75mm PETG 3D Printer Filament
- Overture PETG Filament 1.75mm 1kg Spool