
Predator 212 Non-Hemi - Complete Performance Kit with Shredder Head - Level II
Best price now
Compared across 2 stores. Prices are checked against each store and labelled with when.

Compared across 2 stores. Prices are checked against each store and labelled with when.
A complete top-end and bottom-end package for the non-Hemi Predator 212: CNC-ported Level II Shredder head, PWK carburetor, DynoCams 315 cam, roller rockers, billet ARC flywheel and a billet ARC connecting rod. The head flows about 100 cfm, enough to feed a dyno-verified 24 hp, and the parts are matched so you are not chasing compatibility. It suits kart, mini-bike and mud-motor builders who want a strong mid-range engine and will run high-octane fuel and a high-zinc oil. Compared with buying a head, cam and rod separately, it trades flexibility for a proven combination, and it is not a bolt-on for a stock engine.
In stockReturn policy
In stock
Lowest price we've seen: $941.95 on Nov 20 at bigblockclones.com; highest $946.95 on Nov 10. Tracked across 1 store since Nov 10.
Owners of this package describe strong mid-range pull and a valvetrain that holds together at higher rpm. Most complaints center on the tuning work it demands and the fuel and oil it requires.
This is a complete performance kit for the Predator 212 Non-Hemi engine. It is built around the Level II Shredder head, which is CNC ported and flows 100 cubic feet per minute of air. That is enough to feed 24hp, and the figure is dyno verified. The parts are set up to work together as a package.
The ARC connecting rod is cut from a billet of 7075 aluminum. The ARC flywheel is CNC cut from a billet of 6061 aluminum and has 32° of ignition advance. The DynoCams 315 camshaft has welded and ground lobes and moderate duration for mid-range power. The 5.380" chromoly pushrods and Gage 1.3:1 roller rocker arms bring total valve lift to .416".
With the stock 3cc dished 224 piston and a 0.045" head gasket, compression is 10:1. The optional 22.5mm compression height flat top piston raises it and uses a 0.010" head gasket. The kit needs a minimum of 93 octane pump gas. A compression ratio chart is shown in the kit pictures.
It checks today's price at every store, compares the alternatives and answers in about a minute.











