
BIQU 42HDB4036Z-24B 1A Nema 17 Motor 1.8 degree Class F High Temp Motor
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The BIQU 42HDB4036Z-24B is a standard Nema 17 stepper motor with a 1.8-degree step angle, a 40mm body and a 22mm shaft. Its Class F insulation lets it run safely in enclosed spaces, which is why BIQU uses it in its Rook printer kits. It is a drop-in replacement for most 3D printers that take a 40mm Nema 17, and it ships with a 1m motor harness. Compared with generic Nema 17 motors, the high-temperature rating is the main differentiator; the 1A rating and 3.6 ohm phase resistance are ordinary for this class.
In stockReturn policy
This is a Nema 17 stepper motor with a 1.8° step angle and two phases. The body is 40 mm tall, the shaft is 22 mm long, and the motor is black. A 1 m motor harness is included.
It is the standard motor for Rook printer kits and fits most 3D printers. The motor is rated at DC 3.6 V and 1.0 A per phase and produces a holding torque of at least 450 mN·m. Phase resistance is 3.6 Ω and phase inductance is 8 mH, each within the listed tolerance.
Class F insulation gives the motor a higher insulation class than standard motors, for use at higher currents and higher ambient temperatures. Running at or near full amperage above 40 °C affects the motor's longevity, and a lower amperage is recommended in hotter environments.
It checks today's price at every store, compares the alternatives and answers in about a minute.