
Flipsky IP68 Waterproof ESC Electronic Speed Controller Mini FSESC6.8 Plus based on VESC6 150A for Efoil Ejet / boat esurf
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Flipsky Mini FSESC6.8 Plus is a sealed, IP68-rated electronic speed controller built on the VESC 6 platform, aimed at efoil, ejet and e-surf builds. It handles 150A continuous and 200A peak at 14V–52V (4S–13S), with an STM32F405 processor, 6-layer PCB and 8AWG power and motor leads. It is sensorless only and tuned through VESC Tool over USB or UART, so it suits builders who want VESC configurability in a water-resistant case. Against bare VESC 6 boards it trades some flexibility for sealing and a compact 97x64x28mm footprint.
In stockShips from China · duties may applyReturn policy
This is a waterproof electronic speed controller for efoil, ejet, boat and esurf builds. It is fully sealed to an IP68 rating and is built around an aluminum case that measures 97.2 x 63.6 x 27.5 mm including the case. It is based on VESC6 and runs firmware 6.06, and it supports firmware 6.06 or above.
Inside is a 6-layer, 3oz PCB made for heat dissipation, with an STM32F405 CPU on an ARM Cortex-M4 structure. The unit runs sensorless motors in BLDC or FOC (sinusoidal) mode and offers three control modes: current, duty cycle and speed. It is programmable through VESC_TOOL and supports real-time data readout.
It handles a continuous 150A and an instantaneous 200A, with those values depending on how it is mounted and the ambient temperature around the device. It takes 14V to 52V, or 4 to 13S cells, and is safe for 4S to 12S; voltage spikes may not exceed 60V. Regenerative braking is supported, and protection covers low voltage, high voltage, over-current, abnormal temperature and MOSFET over-temperature above 80 °C.
It checks today's price at every store, compares the alternatives and answers in about a minute.
















