
FLIPSKY Mini V6 MK5 With Power Button base on VESC_6_MK5 With Aluminum Anodized Heat Sink
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Flipsky Mini V6 MK5 is a small VESC-based motor controller built on the VESC 6 MK5 hardware, running firmware 6.02. It adds a phase filter circuit for more accurate rotor position at low speed and an integrated smart switch with a 16mm self-resetting power button, roll-to-start, auto-off and LED status. It handles 70A continuous and 200A instantaneous from 4S to 12S packs, with USB, CAN and UART ports and support for hall, ABI and AS5047/AS5048 encoders. It suits DIY e-skate, e-bike and robotics builders who want a compact VESC 6 controller with a built-in switch; it is smaller and lighter than full-size VESC 6 boards but its 60V ceiling and 70A continuous rating limit it against larger, higher-voltage controllers.
In stockShips from China · duties may applyReturn policy
The Mini V6 MK5 is a motor controller built on the VESC_6_MK5 platform. It has an aluminum anodized heat sink and an integrated power button. It measures 67 x 39 x 18.7 mm including the heat sink.
It runs firmware 6.02 with upgrade support; the firmware is 60_MK5 and the hardware version is VESC_6_MK5. It handles 14V-60V and 4-13S cells, with 4S to 12S safe. Continuous current is 70A and instantaneous current is 200A.
A phase filter circuit provides more accurate rotor position information at low speeds. The smart switch supports manual power on/off, roll to start, auto turn off, and an LED that indicates state. It offers four shutdown modes: ALWAYS_OFF, ALWAYS_ON, TOGGLE_BUTTON_ONLY, and OFF_AFTER_.
It checks today's price at every store, compares the alternatives and answers in about a minute.
















