
Flipsky Sensored Outrunner Brushless DC Motor Battle hardened 7070 110KV 140KV 170KV 4200W
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Flipsky 7070 is a sensored outrunner brushless motor for electric skateboards, e-bikes and DIY drives. It runs on 6S to 18S packs, is rated 2200W continuous and 4200W peak, and makes up to 9.5 Nm of torque at 1.08 kg. The 12N/14P stator, 4mm bullet connectors and hall sensor leads with a temperature wire make it a plug-in upgrade for VESC-based builds. Its 70mm diameter and 10mm shaft suit mounts built for that size, so check clearance before buying. Riders pick the 110KV, 140KV or 170KV winding to trade top speed for torque.
In stockShips from China · duties may applyReturn policy
The Flipsky 7070 is a battle-hardened sensored outrunner brushless DC motor. It has a 12N/14P motor structure and measures 70 mm in diameter and 70 mm in length. It is offered in 110KV, 140KV and 170KV versions.
It has a 6-18S voltage range. Rated power is 2200 W, with 4200 W maximum power, 100 A maximum current, and 9.5 N.M maximum torque. The motor weighs 1.08 kg and has an internal resistance of 0.055 ohm.
The motor has a 10 mm D-shaft or round shaft and a 4 mm bullet connector. It is sensored, with a 32 cm line length. The hall leads are red 5V, white TEMP, black GND, yellow HALL1, green HALL2, and blue HALL3.
It checks today's price at every store, compares the alternatives and answers in about a minute.








