
PETG Filament Spool 1.75mm / 1kg for 3D Printer(Grey)
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
This is a 1 kg spool of grey PETG filament for FDM/FFF 3D printers, wound at 1.75 mm with a stated tolerance of ±0.03 mm and about 330 m of filament. PETG sits between PLA and ABS: it is tougher and more impact-resistant than PLA, with 82% elongation at break and a 50 MPa tensile strength, while printing without the fumes and warping that make ABS fussy. It prints hot, at 230-250°C with a 70-90°C bed, so it suits functional parts, brackets, clips and outdoor pieces rather than fast decorative prints. Compared with PLA it demands more tuning and slower speeds; compared with ABS it is easier to live with but less heat-resistant, softening around 62°C.
In stockReturn policy
This is a 1 kg spool of PETG filament for FDM and FFF 3D printers, in grey. The filament is 1.75 mm in diameter and runs about 330 m. PETG is odorless and non-toxic.
The filament is wound with a precision winding system for neat, tangle-free layers, and the spool's larger inner diameter feeds smoothly to reduce interruptions and breakages. Printed models resist cracking and warping, including under repeated bending.
Print with a nozzle temperature between 230 and 250 °C, with 240 °C recommended, and a bed temperature between 70 and 90 °C. Drying the filament before use is recommended.
It checks today's price at every store, compares the alternatives and answers in about a minute.




