
LANZOELIFE PETG 3D Printer Filament 1.75mm, 1KG Spool (2.2lbs), Black
Where to buy
No store is showing a current price right now. The stores below sell it; ask the agent to check today's prices.
Prices are checked against each store and labelled with when.
Our take on the LANZOELIFE PETG 3D Printer Filament 1.75mm, 1KG Spool (2.2lbs), Black
LANZOELIFE PETG is a 1.75mm filament on a 1kg spool aimed at everyday FDM printing. PETG sits between PLA and ABS: tougher and more impact-resistant than PLA, with better weather resistance, but it prints hotter (240-270°C) and needs a heated bed around 80°C. The 0.02mm diameter tolerance is the spec that matters most for consistent extrusion. It suits hobbyists and functional-part printers who want strength without ABS's warping and fumes; PLA users wanting easy printing should stay with PLA.
- Tough, high impact strength
- Better weather resistance than PLA
- 0.02mm diameter tolerance for consistent feed
- Prints on common FDM printers
- Resealable bag for storage
- Prints hotter than PLA, so not drop-in for PLA profiles
LANZOELIFE PETG 3D Printer Filament 1.75mm, 1KG Spool (2.2lbs), Black prices at every store
- WalmartNew
Out of stockSold by LZ StoreReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$19.99Free shippingChecked 1 h ago
About the LANZOELIFE PETG 3D Printer Filament 1.75mm, 1KG Spool (2.2lbs), Black
This is LANZOELIFE PETG filament for FDM 3D printers, supplied on a 1 kg (2.2 lbs) spool with a 1.75 mm diameter. The material is PETG (polyethylene terephthalate glycol), whose properties fall between those of PLA and ABS.
The plastic has high impact strength, outstanding toughness and weather resistance, and is easy to print and mold. It prints at 240–270°C with a base plate temperature of 80°C, and the filament diameter is held to a 0.02 mm tolerance.
It fits most 3D FDM printers. Unused filament goes back into its resealable bag for future use and secure containment.
- Material
- PETG (polyethylene terephthalate glycol)
- Diameter
- 1.75 mm
- Tolerance
- 0.02 mm
- Printing temperature
- 240–270°C
- Base plate temperature
- 80°C
- Spool weight
- 1 kg (2.2 lbs)
- Net weight
- 1.1 kg
- Colors
- Black, White, Red
- Compatibility
- Most 3D FDM printers
- Care
- Return unused filament to its resealable bag
Specifications
- actual_color
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Questions and answers
- What temperature should I print it at?
- The manufacturer lists 240-270°C at the nozzle and about 80°C on the bed. Start near the middle of the nozzle range and adjust for your printer.
- Is PETG stronger than PLA?
- Yes. PETG has higher impact strength and more flex than PLA, and it resists weather better. PLA is stiffer and easier to print.
- Does it fit my printer?
- It is 1.75mm diameter with 0.02mm tolerance, the common size for FDM printers. Check that your printer takes 1.75mm filament and can reach 240°C or more.
- How should I store it?
- Return unused filament to the resealable bag. PETG absorbs moisture, which causes popping and weak layers, so keep it dry.
- Why is my print stringing?
- PETG oozes more than PLA. Raise retraction slightly, lower the nozzle toward 240°C, and dry the filament if it has been exposed to air.
- What do buyers say about the LANZOELIFE PETG 3D Printer Filament 1.75mm, 1KG Spool (2.2lbs), Black?
- Rated 5 out of 5 from 1 ratings.












