Prices are checked against each store and labelled with when.
This is a 1 kg spool of 1.75mm PETG filament in navy blue, aimed at FDM printers including AMS and AMS Lite setups. It is sold as a high-speed PETG rated for 30-600mm/s, with a 230-260°C nozzle and 60-80°C bed, and it is engineered for low stringing. PETG is tougher and more weather, water and UV resistant than PLA, which makes it the pick for brackets, jigs, planters and outdoor fixtures. Against generic PETG spools it stands out on the wide speed range and the stated ±0.02mm diameter tolerance; the trade-off is that PETG is hygroscopic, so it needs drying and airtight storage.
In stockSold by yaxiReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
This is a 1 kg spool of PETG filament with a 1.75 mm diameter, accurate to ±0.02 mm. It feeds through FDM printers and works with AMS and AMS Lite. The color is Navy Blue.
Recommended print settings are a nozzle temperature of 230–260 °C, a bed temperature of 60–80 °C and a speed of 30–600 mm/s, on a smooth or textured PEI plate. PETG is hygroscopic, so drying at 55–65 °C for 5–8 hours is recommended before printing, especially for print times over 6 hours. Between uses, store the spool in an airtight container with desiccant, away from direct sunlight and high temperatures.
The filament is engineered for low stringing; use a retraction of 1–3 mm and keep it dry for the best results. The material is tough and resists weather, water and UV. Typical uses include brackets, jigs, planters, bird feeders and outdoor fixtures.
It checks today's price at every store, compares the alternatives and answers in about a minute.












