
Flipsky 75100 V2.0 With Aluminum PCB With Power Key Switch Button Based on VESC For Electric Skateboard / Electric Scooter / Ebike Speed Controller
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Flipsky 75100 V2.0 is a VESC-based speed controller for electric skateboards, scooters and ebikes. It runs 4-20S packs (14-84V) at 100A continuous and 250A peak, with an aluminum PCB for heat spreading and a red power key switch on board. It offers DC, BLDC and FOC modes, USB, CAN and UART ports, and sensor support for hall, ABI and AS5047/AS5048A encoders. It suits builders who want one compact controller across a wide voltage range and are willing to tune firmware themselves; it is not a plug-and-play unit like a stock scooter controller.
In stockReturn policy
The Flipsky 75100 V2.0 is a speed controller built on the VESC platform for electric skateboards, electric scooters and ebikes. It uses an aluminum PCB and has a red power switch button.
It runs on 14-84V (4-20S) and handles 100A continuous and 250A peak current. It offers DC, BLDC and FOC (sinusoidal) modes, with a 5V@1A BEC and up to 150000 ERPM.
It comes with firmware 5.02 and can be upgraded; for firmware 5.03 or newer, the phase filter needs to be turned off. The controller is programmable and supports regenerative braking. It connects through USB, CAN and UART ports, works with ABI, HALL, AS5047 and AS5048A sensors, and accepts PPM, ADC, NRF and UART inputs. The wiring uses 12AWG wire.
It checks today's price at every store, compares the alternatives and answers in about a minute.










