StoreDeal.ai store
Shop
  • Deals
  • Deal checker
  • Black Friday
  • Buying guides
  • Brands
  • Stores
Travel
  • Flight deals
  • Hotel deals
Company
  • Research
  • Press
  • Use in AI assistants
  • Contact
  • deal.ai apps
Black Friday 2026
  • Walmart
  • Best Buy
  • Target
  • TVs
  • Laptops
  • Headphones
  • Apple
  • Gaming
  • Vacuums
  • Kitchen
  • Toys
  • Smartwatches
  • Tablets
  • Furniture
  • Mattresses
© Deal.ai Inc.·2222 Ponce de Leon Blvd, Miami, FL 33134·support@deal.ai
TermsPrivacy
Deal.ai › Flipsky
Flipsky
Flipsky 75200 Pro V2.0 With Aluminum PCB Based on VESC For Electric Skateboard / Electric Scooter / Ebike Speed Controller

Flipsky 75200 Pro V2.0 With Aluminum PCB Based on VESC For Electric Skateboard / Electric Scooter / Ebike Speed Controller

Best price now

$150.00at FLIPSKYChecked 4 h ago

Prices are checked against each store and labelled with when.

Finding cheaper alternatives

Checking the Deal.ai store…

Price facts

  • Lowest price today: $150.00 at FLIPSKY (checked Nov 20, 2026).
$150.00at FLIPSKYChecked 4 h ago
Visit FLIPSKY

Our take on the Flipsky 75200 Pro V2.0 With Aluminum PCB Based on VESC For Electric Skateboard / Electric Scooter / Ebike Speed Controller

The Flipsky 75200 Pro V2.0 is a single-motor VESC-based speed controller for electric skateboards, scooters and ebikes. It runs VESC firmware 7.00, handles 14-84V (4-20S), and is rated for 50V/200A or 75V/150A continuous with 300A bursts. The aluminum PCB spreads heat better than the bare FR4 boards on cheaper VESC clones, and the 32F405 CPU, phase filters and full sensor support put it above basic 4.12-style controllers. It suits builders pushing high current on 12-20S packs who want VESC Tool tuning and an onboard power switch.

Best forHigh-power esk8 and ebike builds on 12-20SDIY riders who tune with VESC ToolSingle-motor setups needing 200A+ burstsBuilders wanting an integrated power switch
Pros
  • Aluminum PCB improves heat spreading under load
  • High current headroom: 200A continuous at 50V, 300A burst
  • Runs VESC firmware 7.00 with full VESC Tool programming
  • Wide 14-84V input covers 4S to 20S packs
  • Supports HALL, ABI, AS5047/AS5048A encoders and sensorless
  • Onboard red power switch and CAN, UART, USB, SPI, IIC ports
Cons
  • Continuous current ratings depend on mounting and airflow
  • Single drive only, so dual-motor builds need two units
  • Large footprint at 130x68x41mm
  • Needs external IMU module for balancing features
  • Setup through VESC Tool is not plug-and-play for beginners

Flipsky 75200 Pro V2.0 With Aluminum PCB Based on VESC For Electric Skateboard / Electric Scooter / Ebike Speed Controller prices at every store

  • FLIPSKYNew

    In stockReturn policy

    $150.00Checked 4 h ago
    Visit FLIPSKY

What reviewers say

Owners of Flipsky VESC controllers generally report strong power delivery and good thermal behavior from the aluminum PCB, with the usual caveat that setup and firmware flashing take care. Complaints center on heat under sustained load and the learning curve of VESC Tool.

What people mention
  • HeatMixedThe aluminum PCB helps, but riders say it still needs airflow and can get hot in sealed enclosures.
  • PowerPraisedOwners report strong acceleration and current headroom on high-voltage builds.
  • SetupMixedVESC Tool configuration works well once learned but is not beginner-friendly.
  • BuildPraisedBuyers describe the board and 8 AWG wiring as sturdy and well assembled.
  • FirmwareMixedA few owners had to reflash or update firmware before the controller behaved correctly.

About the Flipsky 75200 Pro V2.0 With Aluminum PCB Based on VESC For Electric Skateboard / Electric Scooter / Ebike Speed Controller

The Flipsky 75200 Pro V2.0 is a VESC-based speed controller for electric skateboards, scooters and ebikes. It runs firmware 7.00 and supports 7.00 or above. The voltage range is 14-84 V, safe for 4-20S, and it supports DC, BLDC and FOC (sinusoidal) modes.

The continuous current is 50 V/200 A and 75 V/150 A, with 300 A burst current; these values depend on mounting, ambient temperature and air/water circulation around the device. A 32F405 CPU runs at 168 MHz, and the aluminum PCB is used for heat dissipation. The controller has a red power switch button, a single serial port and an integrated Bluetooth module.

Communication ports are USB, CAN, UART, SPI and IIC. Input sources are PPM, ADC, NRF and UART, and supported sensors are ABI, HALL, AS5047 and AS5048A; sensorless operation is also supported. It is programmable through VESC_TOOL and supports regenerative capacity. Adjustable protections cover low voltage, high voltage, overcurrent, abnormal temperature and MOSFET/motor over temperature.

Firmware
7.00 (supports 7.00 or above)
Voltage
14-84 V (safe for 4-20S)
Continuous current
50 V/200 A; 75 V/150 A
Burst current
300 A
BEC
5 V @ 1 A
Modes
DC, BLDC, FOC (sinusoidal)
ERPM
150000
Ports
USB, CAN, UART, SPI, IIC
Sensors
ABI, HALL, AS5047, AS5048A
Input sources
PPM, ADC, NRF, UART
Sensorless
Supported

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Enter to send, Shift+Enter for a new line

Questions and answers

What voltage and battery packs does it support?
It accepts 14-84V, which covers 4S to 20S packs. Stay within 84V at full charge.
How much current can it handle?
Flipsky rates it at 50V/200A or 75V/150A continuous and 300A burst. Real limits depend on mounting, ambient temperature and airflow.
Can I program it with VESC Tool?
Yes. It runs VESC firmware 7.00 and is configured over USB with VESC Tool, including motor detection and current limits.
Does it work with sensored and sensorless motors?
Both. It supports HALL, ABI, AS5047 and AS5048A sensors, and runs sensorless as well.
Can it balance a board?
Only with an external IMU module wired to the IIC port, such as an MPU6050 or BMI160. The IMU is not built in.
What is in the box?
The controller itself with its power switch and 8 AWG motor leads. Check the listing for any included cables or manuals.
Where is the Flipsky 75200 Pro V2.0 With Aluminum PCB Based on VESC For Electric Skateboard / Electric Scooter / Ebike Speed Controller cheapest?
At FLIPSKY, for $150.00, as of our latest check.

More from Flipsky

  • F
    Flipsky Dual FSESC6.7 Plus based on VESC6 With Power Button
    Flipsky Dual FSESC6.7 Plus based on VESC6 With Power Button
  • F
    FLIPSKY FSESC 6.7 PRO based upon VESC6 with Aluminum Case and Anti-spark switch/with Heat Sink
    FLIPSKY FSESC 6.7 PRO based upon VESC6 with Aluminum Case and Anti-spark switch/with Heat Sink
  • F
    Flipsky 75100 V2.0 With Aluminum PCB With Power Key Switch Button Based on VESC For Electric Skateboard / Electric Scooter / Ebike Speed Controller
    Flipsky 75100 V2.0 With Aluminum PCB With Power Key Switch Button Based on VESC For Electric Skateboard / Electric Scooter / Ebike Speed Controller
  • F
    Flipsky Fully Waterproof Remote VX3 controller For Efoil | Esurf | ESK8
    Flipsky Fully Waterproof Remote VX3 controller For Efoil | Esurf | ESK8
  • F
    Flipsky 75100 With Aluminum PCB Based on VESC For Electric Skateboard / Electric Scooter / Ebike Speed Controller
Regenerative capacity
Supported
Programming
VESC_TOOL
Dimensions
130 x 68 x 41 mm
Motor/power wire
8 AWG
Phase filter
Yes
Power switch
Red button; built-in on/off switch
CPU
32F405 at 168 MHz
Protections
Low voltage, high voltage, overcurrent, abnormal temperature, MOSFET/motor over temperature; adjustable
Control modes
Current, duty cycle, speed, PID
IMU support
MPU9250, MPU9150, MPU6050, LSM6DS3, BMI160 via IIC
Bluetooth
Integrated module
Serial port
Single serial port
PCB
Aluminum
Drive
Single
Flipsky 75100 With Aluminum PCB Based on VESC For Electric Skateboard / Electric Scooter / Ebike Speed Controller
  • F
    Flipsky FT85BD100A Dual ESC 85V 100A With Aluminum Case NON-VESC For Electric Skateboard / Electric Scooter / Ebike Speed Controller / Electric Motorcycle / Robotics
    Flipsky FT85BD100A Dual ESC 85V 100A With Aluminum Case NON-VESC For Electric Skateboard / Electric Scooter / Ebike Speed Controller / Electric Motorcycle / Robotics
  • F
    FLIPSKY Mini V6 MK5 With Power Button base on VESC_6_MK5 With Aluminum Anodized Heat Sink
    FLIPSKY Mini V6 MK5 With Power Button base on VESC_6_MK5 With Aluminum Anodized Heat Sink
  • D
    Dual FSESC4.20 Plus (Based on VESC ) with Anodized Aluminum Heatsink
    Dual FSESC4.20 Plus (Based on VESC ) with Anodized Aluminum Heatsink
  • All Flipsky deals and products →

    More motor speed controllers

    • D
      DC Motor Speed Controller
      DC Motor Speed Controller
    • P
      PWM DC Motor Speed Controller with Display
      PWM DC Motor Speed Controller with Display
    • F
      Flipsky Mini V6 MK5 Speed Controller
      Flipsky Mini V6 MK5 Speed Controller
    • F
      Flipsky FSESC 6.6 Dual
      Flipsky FSESC 6.6 Dual
    • F
      FLIPSKY Mini FSESC6.7 PRO 70A base on VESC6.6 With Aluminum Anodized Heat Sink
      FLIPSKY Mini FSESC6.7 PRO 70A base on VESC6.6 With Aluminum Anodized Heat Sink
    • F
      Flipsky 75100 Pro V2.0 With Aluminum PCB Based on VESC For Electric Skateboard / Electric Scooter / Ebike Speed Controller
      Flipsky 75100 Pro V2.0 With Aluminum PCB Based on VESC For Electric Skateboard / Electric Scooter / Ebike Speed Controller