
Flipsky Dual FSESC6.7 Plus based on VESC6 With Power Button
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Flipsky Dual FSESC6.7 Plus is a dual-motor VESC speed controller for electric skateboards, based on VESC 6.7 hardware. It runs two motors from one board, handles 8V to 60V (3S-12S LiPo) and is rated at 100A continuous per side, 200A total, with 400A instantaneous per side. The Plus version adds a push-button power switch, a CAN bus connector for 4WD builds, and SMT-soldered capacitors and USB port. It suits DIY builders who want one compact dual controller with a power button and 4WD expansion; it is not a plug-and-play unit, and Flipsky advises staying on firmware 5.2 because newer firmware may damage the ESC.
In stockShips from China · duties may applyReturn policy
The Dual FSESC6.7 Plus is a dual electronic speed controller built on the VESC 6 design, with V6.7 hardware and a push-button power switch. Each side handles 100 A continuous and 400 A instantaneous, for 200 A and 800 A total across the two. It runs on 8 V to 60 V, which covers 3S to 12S LiPo packs.
The board uses surface-mount capacitors and a surface-mount USB port, with extra mosfets added on the bottom side. It has a CAN bus connector for 4WD builds, 12AWG motor wires and an 8AWG power cable. It comes in an aluminum case or with a heatsink.
It drives motors in DC, BLDC and FOC (sinusoidal) modes and works with ABI, HALL and AS5047 sensors, up to 150000 ERPM. It ships with firmware 5.2, and upgrading the firmware may damage the ESC. Leave the shrink wrap on to protect the PCB from metal or impurities that could short it, and keep voltage spikes from exceeding 60 V.
It checks today's price at every store, compares the alternatives and answers in about a minute.













