
BTF-LIGHTING CCT COB LED Strip Light Tunable White 2700K-6500K
Best price now
Compared across 3 stores. Prices are checked against each store and labelled with when.

Compared across 3 stores. Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A 9.8 ft flexible COB LED strip that tunes from warm 2700K to daylight 6500K, with 640 LEDs per meter on a black PCB. The chip-on-board design gives a continuous, even glow with no dark gaps, unlike older SMD strips, and the high CRI of 90+ keeps colors looking natural. It needs a separate CCT dimmer and a 24V power supply, so plan for those. Best for indoor accent, cabinet and cove lighting where smooth dimming and adjustable white matter more than weatherproofing.
In stockReturn policy
In stockMade for another market
Availability unknown
As an Amazon Associate, Deal.ai earns from qualifying purchases.
Store links may earn us a commission.
Lowest price we've seen: $16.46 on Nov 16 at btf-lighting.com. Tracked across 2 stores since Nov 16.
Buyers rate it highly, praising the smooth, uniform light and the wide tunable white range. Complaints center on the extra cost of the required power supply and dimmer and on the adhesive needing help.
This is a chip-on-board (COB) LED strip with tunable white light that runs from warm white 2700K to cool daylight 6500K. It is 9.8 ft long, carries 640 LEDs per meter on a black PCB, and is flexible, with a 10 mm width.
The dense COB light-emitting units give a bright, soft, uniform light without dark spots. The color rendering index is above 90, the viewing angle is 180°, and the strip is rated for more than 65,000 hours of use. The strip can be cut every 25 mm at the marked solder spots and reconnected with 3-core ribbon cable and connectors. It has a 4-pin, 3-wire male plug on one end and a female plug on the other, and strips can be joined end to end in series.
Pair it with a standard CCT dimmer, sold separately, to set brightness and color temperature independently. The self-adhesive backing attaches it to a surface; clean and dry the surface thoroughly before installation. It is rated IP30 and is for indoor use.











