
FLIPSKY Mini FSESC6.7 PRO 70A base on VESC6.6 With Aluminum Anodized Heat Sink
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Flipsky Mini FSESC6.7 PRO is a small VESC-based speed controller for electric skateboards, e-bikes and robotics. It runs 14V to 60V (4S to 12S), handles 70A continuous and 200A peak, and supports DC, BLDC and FOC modes with current, duty cycle, speed and position control. Its aluminum anodized heat sink, 12AWG motor and power wires and 5V@1A BEC make it a compact single-motor option. Against larger VESC 6.6 boards it trades some thermal headroom for size, and it is not a dual-motor controller.
In stockShips from China · duties may applyReturn policy
The Mini FSESC6.7 PRO is a motor speed controller built on VESC6.6, rated for 70A continuous current and 200A instantaneous current. It runs on 14V to 60V, with 4S to 12S packs listed as safe and voltage spikes not to exceed 60V. An anodized aluminum heat sink is included.
It measures 67 x 39 x 18.7 mm including the heat sink and weighs 130 g. The motor wire and the power cable are both 12AWG.
It runs DC, BLDC and FOC (sinusoidal) modes and supports current, duty cycle, speed and position control. It reads ABI, HALL, AS5047 and AS5048A sensors and accepts PPM, ADC, NRF and UART inputs. Protection covers low voltage, high voltage, over-current, abnormal temperature and mosfet over-temperature. Connecting an IMU module through the IIC interface supports the balancing car function, with MPU9250, MPU9150, MPU6050, LSM6DS3 and BMI160 modules supported.
It checks today's price at every store, compares the alternatives and answers in about a minute.









