
Flipsky FSESC Gateway Interface
Best price now
Prices are checked against each store and labelled with when.
Finding cheaper alternatives
Price facts
- Lowest price today: $33.00 at FLIPSKY (checked Nov 20, 2026).

Prices are checked against each store and labelled with when.
The Flipsky FSESC Gateway Interface is a small CAN bridge module for VESC-based builds. It turns throttle, brake, steering and gear inputs into CAN commands, so one controller can drive several ESCs in a network. It supports UART, PPM and ADC input, with the active mode chosen in VESC Tool, and it reports voltage, current, speed, temperature, duty cycle and faults back over UART or USB. It suits DIY e-skate, e-bike and robotics builders running more than one FSESC who need a central input hub; single-ESC riders get little from it.
In stockShips from China · duties may applyReturn policy
The Flipsky FSESC Gateway Interface is a control module for FSESC (VESC) controllers. It converts throttle, brake, steering, gear and other inputs into CAN control commands. It works with all FSESC types and supports multi-ESC networked cooperative control.
Inputs can come in over UART, PPM or ADC, and the active control mode is selected in VESC_TOOL. The supported control modes are current, duty cycle and speed control. The module transmits voltage, current, rotational speed, temperature, duty cycle and fault status back over UART or USB.
USB passthrough lets a host computer access, identify and configure a specific ESC by its CAN ID. The module requires a 5V power supply only and comes in an aluminum enclosure measuring L47mm x W36mm x H17.6mm. The blue and green LEDs are on while it works, the green LED brightens in the drive state, the red LED flashes in upgrade mode and stays on during an ESC fault.
It checks today's price at every store, compares the alternatives and answers in about a minute.











